Water Damage Restoration – A Brief Preview

It’s the method of repairing a residence or property to its pre loss condition. Harm to the property could possibly be as a result of an overflow, flood or any other water damage event. The water damage restoration process involves several key procedures like loss assessment, categorization based on the water contamination levels, decontaminating and drying the structure, monitoring of the method and completion of the process. You will find two large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and the RIA (Restoration Industry Association) that recommends standards for water damage restoration. The S500 damage because of water guide is the benchmark tool that’s employed by companies that specialize in restoration of water damage.
water damage restoration Des Moines, IA

Loss Assessment and Categorization

Loss evaluation is the initial and the most important part of water damage restoration. The assessment needs to be correct so an appropriate response can be taken. In restorating the damage due to water, technicians and the insurance companies must come together and understand what is damaged and just how to begin restoring the damage. Identifying the origin of the damage, documentation of damage, and accurate estimates are mandatory for a suitable water damage restoration. Categorization is based on the contamination levels of the water source. The categories are listed below

Category 1 – This really is water from clean sources like pipes, sinks and toilets without faeces or urine.

Category 2 – This really is water that’s some contaminants like water from a dishwasher, washer or toilet with urine.

Category 3 – This really is water that’s highly unsanitary and is effective at causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are some examples.

Decontamination and Drying

Following the evaluation is complete, the method of drying and decontaminating begins at the site. On the basis of the extent of damage, damage caused because of water can be classified into 4 types. Class 1 Damage- When loss is restricted to a small area and less water has been absorbed by materials. This results in slow evaporation rate. Class 2 Damage – Once the damage is to the entire room and carpet area. Class 3 Damage – When the entire area is saturated with water and Class 4 Damage – when there are lots of deep saturation pockets. Decontamination and drying is really a key stage in Water damage restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments need to be used. Decontamination needs to be performed if contamination has been detected in the area. Decontamination may be performed for the entire area or in specific pockets where contamination has been detected.

Author: admin

Leave a Reply

Your email address will not be published. Required fields are marked *